Fumoto Oil Drain Valves

The Fumoto Drain Valve allows you to easily drain your motor oil without tools. It simply replaces your factory drain plug.  To drain the oil all that's needed is to lift the locking lever and rotate a quarter of a turn.  When done simply rotate it back to it's locking position.  The valve assembly is constructed of forged brass and stainless steel.  There are 2 seals at both ends of the ball valve to ensure a complete leak free seal.  They're also available with a drain nipple.  The drain nipple can be used to connect a hose for draining the oil away from the valve or to fill containers such as for oil analysis.  Valves with the nipple will protrude lower and this should be taken into consideration on 2WD vehicles or off road applications.

• No more dropping the drain plug into the bucket of hot oil only to try to fish it out with your hand.
• No more oil dripping down your arm.
• No more dropping an oily wrench into your drain bucket - splash!!!
• No more stripped threads.
• Aids in obtaining oil samples for testing.
• Available with or without a drain nipple.

Valve with Nipple	Cutaway image Valve in Closed position	Cutaway image Valve in Open position