ISSPRO Gauge Kits for Ford Powerstroke from DieselManor

We've put together complete three gauge kits for Ford Powerstroke owners. This is an alternative to buying individual Gauges, gauge mount, and all of the hardware and sub-components yourself. Most suppliers require you to purchase all of the optional accessories separately, if they offer them at all. We at DieselManor believe that you shouldn't have to find out in the middle of your install that you don't have everything that you need, causing unwanted trips to the hardware store or an additional phone call to the distributor. Therefore we have put together complete kits for most popular applications.
Note: All gauge pods come in black ABS plastic.

Detailed Description
• Full A-Pillar or Dash Gauge Mount from Autometer/Gaugeworks. Please see our SpectraMatch™ paint section for a full list of factory matched spray paint designed specifically for painting gauge mounts.
• Your choice of gauge dial color - (images below).
• EV Pyrometer, 0-1500°F scale with lead wire and matching Inconel Thermocouple, 1/8" NPT. Thermocouples are genuine ISSPRO - No off brand overseas substitutions.
• EV Boost gauge with your choice of 0-30, 0-40 or 0-60 PSI, with 10' Complete Tubing Kit. Also includes DieselManor T-fitting kit for MAP line (for 7.3L), or Male 90° Compression Tube Fitting for intake elbow (6.0L/6.7L).
• EV Transmission Temp gauge with 100-280°F scale. Comes with matched sending unit.
• All gauges will dim equally along with your factory instrument cluster. Gauges connect directly to your factory dimmer wire. All kits come with DieselManor wiring harness to simplify lighting connections to each gauge.


Thermocouple Options
	Part #: R658SHT-8F (Ring Terminals) - The standard thermocouple with all kits is the R658SHT-8F. Both the leadwire and thermocouple have ring terminals. To make the connection you need to overlap one ring of the thermocouple over the matching ring terminal of the leadwire. Then you insert a screw through both ring terminals and tighten a nut on the back side. This is done for both leads (red and yellow) of the thermocouple. This thermocouple has an adjustable Hi-Temp Inconel tip, rated to 2000°F. Adjusts to 1-5/8" and is supplied with a 1/8"NPT slip nut. It requires you to drill and tap the exhaust manifold (tap and bit sold below if needed).
	Part #: R658SHT-8F-PL (Weather Pack Connector) This upgradeable thermocouple is the same as above except it has a DELPHI Weather Pack connector. It simply plugs into the matching weather pack leadwire. This connector speeds up installation time, is fully weatherproof, and is unaffected by, dirt, chemicals, or vibration. Identical to the factory connectors under your hood already, Weather Pack connectors are used my most OEMs. If you choose this option you will get a matching Weather Pack leadwire.

Here's What Else You Get:
A complementary assembly kit which includes: Detailed Installation Instructions, T-Fitting kit to tie the boost line into the Map sensor line instead of drilling and tapping the intake Manifold (for 7.3L models), wiring harness for gauge backlighting, all necessary hook-up wire, crimps, connectors, snap grommets, fuse tap with fuse, and wire ties.

Click to enlarge (this link will open up a new window)

Why should you buy your gauge kit from DieselManor?

We provide an ISSPRO Hi-Temp Inconel Thermocouple, (rated to 2000°F). Other diesel stores may only provide you with a standard, less expensive thermocouple.
You'll get everything you need to do the install, including T-Tap connectors and wire crimps.
You'll receive our our vehicle specific installation instructions in addition to the ISSPRO instructions. Our instructions are not generic in nature. One version covers 1999-2003 7.3L models, and the other covers 2003-2007 6.0L models. We will make sure you receive the correct one. They include plenty of photos as well as a wiring schematic.
We've performed countless gauge installations - we know what works. You can rest assured knowing that we've put our expertise to work, ensuring that you will get everything specific to your application. Your satisfaction is what we strive for, nothing less.
We have an after hours tech support line in the event that you require installation assistance during non-business hours.
We fully stand behind the ISSPRO brand. In the unlikely event that you have a malfunctioning part, we will make all of the arrangements to have that item exchanged/replaced, either from our inventory or direct from ISSPRO. ISSPRO's warranty for all analog gauges is 1 years from the purchase date.
Shop around. Ask our competition if they can do all of the above. Demand nothing less.